除氨氮树脂

一、产品简介：

     除氨氮树脂是一种具有特种功能基团的聚合物树脂，对氨氮具有专一选择性，该树脂具有吸附容量大、选择性高、处理精度高的特点，较同类产品，树脂用量更少、树脂使用寿命更长，操作更简便，出水稳定。

二、性能指标：

三、使用时参考指标：

四、树脂使用须知：

      1.清洗离子交换塔及管道，保证容器和管道无杂物；

      2.除氨氮树脂的装填至离子交换塔，至规定高度后，摊平树脂，封堵人孔，试压检漏；

      3.调整阀门至逆流清洗状态，用去离子水清洗树脂至出水清澈透亮；

      4.切换阀门至正吸附状态，调整流量值5-15BV/h，即可进入使用；

      5.检测出水水质，当氨氮超过规定限制后及时切换下一塔吸附，本塔进入解析状态；

The Ammonia-Nitrogen Removal Resin

1.Product Introduction

1. The ammonia-nitrogen removal resin is a polymer resin with special functional groups, which has specific selectivity forammonia-nitrogen. The features include high adsorption capacity, better selectivity, high processing precision. Compared withsimiar oroducrs.the resin consumption is less and the service ite is onaer under the same condition. This resin is simple to onerateand the effluent can be maintained stably.

2.Performance index

3. Reference index for Operation

4.Instructions for Operation

1. 1.Clean the ion exchange tower and pipe to ensure that there is no other things in the container;

2. 2Afer oading the ammonia-nitrogen remoa resin into the specifed heicht of the ion exchange tower, ensure the resin is flattenedthe hole is blocked and the pressure is tested for leakage:

3. 3, Adiust the valve o countercurrent cleaning state. clean the resin with deionized water until the water is clear;

4. 4. The operation can be started after switchina the valve to the positive adsorption state and adiustina the flow value to 5-15BV/h:

5. 5. The efluent quality needs to be tested. When the on-line detection of ammonia-nitrogen exceeds the specified limit, the columnenters the desorption state and switch the next column adsorption in time;